Open Networking Switch

AS4630 series Troubleshooting Guide

• AS4630 series - How to obtain the basic PSU information via I2C command?
• AS4630 series - How to configure the port speed on 1G RJ45 switch ports manually?
• AS4630 series - Error "ixgbe 0000:06:00.0: The EEPROM Checksum Is Not Valid"
• AS4630 series - Troubleshoot for switch port link problems
• AS4630 series - Management port failure
• AS4630 series - SSD failure to caused the switch cannot boot into NOS

AS5835 series Troubleshooting Guide

• AS5835 series - How to obtain the basic PSU information via I2C command?
• AS5835 series - How to identify the management port?
• AS5835 series - Error "ixgbe 0000:06:00.0: The EEPROM Checksum Is Not Valid"
• AS5835-54T - Troubleshoot for switch port link problems
• AS5835 series - SSD failure to caused the switch cannot boot into NOS
• AS5835-54X - Troubleshoot switch port link problems

See all 7 articles

AS7712-32X Troubleshooting Guide

• AS7712-32X - How to obtain the basic PSU information via I2C command?
• AS7712-32X - MCE error
• AS7712-32X - The switch has rebooted unexpectedly
• AS7712-32X - Troubleshoot for switch port link problems
• AS7712-32X - SSD failure to caused the switch cannot boot into NOS
• AS7712-32X - Management port failure

AS7326-56X, AS7726-32X Troubleshooting Guide

• AS7326-56X - How to obtain the basic PSU information via I2C command?
• AS7726-32X - How to obtain the basic PSU information via I2C command?
• AS7326-56X - How to identify whether the hardware version supports RJ-45 copper transceivers?
• AS7326-56X / AS7726-32X - The switch has rebooted unexpectedly
• AS7726-32X - Troubleshoot for switch port link problems
• AS7326-56X - Troubleshoot for switch port link problems

See all 10 articles

[AS57/58/67/68 series] Troubleshooting Guide

• [AS57/58/67/68 series] Management port failure
• [AS57/58/67/68 series] No output message from Console port
• [AS57/58/67/68 series] FAN failure
• [AS57/58/67/68 series] Temperature Sensor
• [AS57/58/67/68 series] SSD failure
• [AS57/58/67/68 series] PSU failure

AS5916-54XL, AS5916-54XKS, AS7816-64X Troubleshooting Guide

• Management port Failure
• Console Port Failure, No output message from Console port
• SSD Failure or Failed to boot the switch into NOS
• PSU Failure
• PSU model name is wrong by getting information from BMC
• FAN Failure

See all 7 articles

Wedge100BF-32X/32QS/65X Troubleshooting Guide

• [Wedge100BF-series] cp2112 Error
• [Wedge100BF-series] Chip, OpenBMC, CPLD, EC Code, BIOS, ONIE, SPI version checking
• [Wedge100BF-series] Console failure
• [Wedge100BF-series] Management Port failure
• [Wedge100BF-series] MAC not found
• [Wedge100BF-series] QSFP can't link-up

See all 9 articles

ARM Troubleshooting Guide

• TroubleShooting Guide for the ARM platform via DIAG mode

BIOS

• [BIOS] How to get x86 switch hardware information?

ONL (Open Network Linux)

• [ONL]How to build the ONL installer for Edgecore switches?
• [ONL]Password recovery for ONL via ONIE.
• [ONL]How to install the Open Network Linux on Edgecore switch? (For x86 CPU only, Exclude AS5710 series and AS4610 series)

Open Networking

• [Open Networking] Where can I get the OF-DPA/OpenNSL deb package?

Barefoot

• [Wedge100BF-series] How to save a static IP for management port of OpenBMC?