What are the supported RADIUS attributes in CoovaChilli Captive Portal? Follow
Attribute(type) | Description |
User-name (1) | Full username as entered by the user. |
User-Password (2) | Used for UAM as alternative to CHAP-Password and CHAP-Challenge. |
CHAP-Password (3) | Used for UAM CHAP Authentication |
CHAP-Challenge (60) | Used for UAM CHAP Authentication |
EAP-Message (79) | Used for WPA Authentication |
NAS-IP-Address (4) | IP address of Chilli (set by the ‘‘nasip’’ or ‘‘radiuslisten’’ option, and otherwise “0.0.0.0”) |
Service-Type (6) | Set to Login (1) for normal authentication requests. The Access-Accept message from the radius server for configuration management messages must also be set to Administrative-User. |
Framed-IP-Address (8) | IP address of the user, which is configurable during MAC authentication in the Access-Accept. |
Framed-IP-Netmask (9) | IP netmask of the user, which is configurable during MAC authentication in the Access-Accept. |
Filter-ID (11) | Filter ID pass on to scripts possibly. |
Reply-Message (18) | Reason of reject if present. |
State (24) | Sent to chilli in Access-Accept or Access-Challenge. Used transparently in subsequent Access-Request. |
Class (25) | Copied transparently by chilli from Access-Accept to Accounting-Request. |
Session-Timeout (27) | Logout once session timeout is reached (seconds) |
Idle-Timeout (28) | Logout once idle timeout is reached (seconds) |
Called-Station-ID (30) | Set to the ‘‘nasmac’’ option or the MAC address of chilli. |
Calling-Station-ID (31) | MAC address of client |
NAS-Identifier (32) | Set to radiusnasid option if present |
Acct-Status-Type (40) | 1=Start, 2=Stop, 3=Interim-Update |
Acct-Input-Octets (42) | Number of octets received from client |
Acct-Output-Octets (43) | Number of octets transmitted to client. |
Acct-Session-ID (44) | Unique ID to link Access-Request and Accounting-Request messages. |
Acct-Session-Time (46) | Session duration in seconds. |
Acct-Input-Packets (47) | Number of packets received from client. |
Acct-Output-Packets (48) | Number of packets transmitted to client. |
Acct-Terminate-Cause (49) | 1=User-Request, 2=Lost-Carrier, 4=Idle-Timeout, 5=Session-Timeout, 11=NAS-Reboot |
Acct-Input-Gigawords (52) | Number of times the Acct-Input-Octets counter has wrapped around. |
Acct-Output-Gigawords (53) | Number of times the Acct-Output-Octets counter has wrapped around. |
NAS-Port-Type (61) | 19=Wireless-IEEE-802.11 |
Message-Authenticator (80) | Is always included in Access-Request. If present in Access-Accept, Access-Challenge or Access-reject chilli will validate that the Message-Authenticator is correct. |
Acct-Interim-Interval (85) | If present in Access-Accept chilli will generate interim accounting records with the specified interval (seconds). |
WISPr-Location-ID (14122, 1) | Location ID is set to the radiuslocationid option if present. Should be in the format: isocc=, cc=, ac=, network=<ssid/ZONE> |
WISPr-Location-Name (14122, 2) | Location Name is set to the radiuslocationname option if present. Should be in the format: , |
WISPr-Logoff-URL (14122, 3) | Included in Access-Request to notify the operator of the log off URL. Defaults to “http://uamlisten:uamport/logoff”. |
WISPr-Redirection-URL (14122, 4) | If present the client will be redirected to this URL once authenticated. This URL should include a link to WISPr-Logoff-URL in order to enable the client to log off. |
WISPr-Bandwidth-Max-Up (14122, 7) | Maximum transmit rate (b/s). Limits the bandwidth of the connection. Note that this attribute is specified in bits per second. |
WISPr-Bandwidth-Max-Down (14122, 8) | Maximum receive rate (b/s). Limits the bandwidth of the connection. Note that this attribute is specified in bits per second. |
WISPr-Session-Terminate-Time (14122, 9) | The time when the user should be disconnected in ISO 8601 format (YYYY-MM-DDThh:mm:ssTZD). If TZD is not specified local time is assumed. For example a disconnect on 18 December 2001 at 7:00 PM UTC would be specified as 2001-12-18T19:00:00+00:00. |
ChilliSpot-Max-Input-Octets (14559, 1) | Maximum number of octets the user is allowed to transmit. After this limit has been reached the user will be disconnected. |
ChilliSpot-Max-Output-Octets (14559, 2) | Maximum number of octets the user is allowed to receive. After this limit has been reached the user will be disconnecte |
ChilliSpot-Max-Total-Octets (14559, 3) | Maximum total octets the user is allowed to send or receive. After this limit has been reached the user will be disconnected. |
ChilliSpot-Bandwidth-Max-Up (14559, 4) | Maximum bandwidth up |
ChilliSpot-Bandwidth-Max-Down (14559, 5) | Maximum bandwidth down |
ChilliSpot-Config (14559, 6) | Configurations passed between chilli and back-end as name value pairs |
ChilliSpot-Lang (14559, 7) | Language selected in user interface |
ChilliSpot-Version (14559, 8) | Contains the version of the running CoovaChilli |
ChilliSpot-DHCP-Netmask (14559, 61) | DHCP IP netmask of the user, which is configurable during MAC authentication in the Access-Accept. |
ChilliSpot-DHCP-DNS1 (14559, 62) | DHCP DNS1 of the user, which is configurable during MAC authentication in the Access-Accept. |
ChilliSpot-DHCP-DNS2 (14559, 63) | DHCP DNS2 of the user, which is configurable during MAC authentication in the Access-Accept. |
ChilliSpot-DHCP-Gateway (14559, 64) | DHCP Gateway of the user, which is configurable during MAC authentication in the Access-Accept |
ChilliSpot-DHCP-Domain (14559, 65) | DHCP Domain of the user, which is configurable during MAC authentication in the Access-Accept. |
MS-MPPE-Send-Key (311,16) | Used for WPA |
MS-MPPE-Recv-Key (311,17) | Used for WPA |
Comments
0 comments
Article is closed for comments.