Top

How to upgrade ECS4120 loader version to extend the ECC (Error Correcting code) support? Follow

Comments

1 comment

  • Avatar
    Broadband

    Hi. I tried running the script but it got stuck and gave error

    C:\ECS4120_uboot_upgrade_v2.0.0>uboot_upgrade.exe
    ===============================================
    Upgrade Tool V2.0.0
    ===============================================
    Product : ECS4120
    Serial port : COM3
    Serial baudrate : 115200
    Uboot : ./uboot/ECS4120-u-boot_v0.0.3.1.bin
    Log file : 20231020_2015_upgrade.log
    ===============================================
     ⁿ≡└■₧ⁿ≡ⁿ■ 

    U-Boot 2015.0.Accton-0.0.2.6 (Nov 20 2015 - 16:06:27)

    BENCH SCREENING TEST1
    =========================================
    IPROC_XGPLL_CTRL_3: 0x05400000
    IPROC_XGPLL_STATUS: 0x800004f4
    DCO code: 79
    PASS
    =========================================
    DEV ID = 0xdb56
    SKU ID = 0xb151
    DDR type: DDR3
    MEMC 0 DDR speed = 667MHz
    ddr_init2: Calling soc_ddr40_set_shmoo_dram_config
    ddr_init2: Calling soc_ddr40_phy_calibrate
    C01. Check Power Up Reset_Bar
    C02. Config and Release PLL from reset
    C03. Poll PLL Lock
    C04. Calibrate ZQ (ddr40_phy_calib_zq)
    C05. DDR PHY VTT On (Virtual VTT setup) DISABLE all Virtual VTT
    C06. DDR40_PHY_DDR3_MISC
    C07. VDL Calibration
    C07.1
    C07.2
    C07.4
    C07.4.1
    C07.4.4
    VDL calibration result: 0x30000003 (cal_steps = 0)
    C07.4.5
    C07.4.6
    C07.5
    C08. DDR40_PHY_DDR3_MISC : Start DDR40_PHY_RDLY_ODT....
    C09. Start ddr40_phy_autoidle_on (MEM_SYS_PARAM_PHY_AUTO_IDLE) ....
    C10. Wait for Phy Ready
    Programming controller register
    ddr_init2: Calling soc_ddr40_shmoo_ctl
    Validate Shmoo parameters stored in flash ..... OK
    Press Ctrl-C to run Shmoo ..... skipped
    Restoring Shmoo parameters from flash ..... done
    Running simple memory test ..... OK
    DDR Tune Completed
    DRAM: 512 MiB
    NAND: Micron MT29F2G08ABAEA, Overriding invalid strap options: strap_type=2
    128 KiB blocks, 2 KiB pages, 16B OOB, 8-bit
    NAND: chipsize 256 MiB
    Traceback (most recent call last):
    File "D:\soft\python27\lib\site-packages\cx_freeze-4.3.3-py2.7-win-amd64.egg\cx_Freeze\initscripts\Console.py", line 27, in <module>
    File "uboot_upgrade.py", line 429, in <module>
    File "uboot_upgrade.py", line 237, in enter_uboot_and_check_loader_version
    File "D:\soft\python27\lib\site-packages\pexpect\spawnbase.py", line 321, in expect
    File "D:\soft\python27\lib\site-packages\pexpect\spawnbase.py", line 345, in expect_list
    File "D:\soft\python27\lib\site-packages\pexpect\expect.py", line 107, in expect_loop
    File "D:\soft\python27\lib\site-packages\pexpect\expect.py", line 70, in timeout
    pexpect.exceptions.TIMEOUT: <pexpect_serial.serial_spawn.SerialSpawn object at 0x00000000026966A0>
    searcher: searcher_re:
    0: re.compile("autoboot:")
    1: re.compile("Booting...")
    <pexpect_serial.serial_spawn.SerialSpawn object at 0x00000000026966A0>
    searcher: searcher_re:
    0: re.compile("autoboot:")
    1: re.compile("Booting...")

    0
    Comment actions Permalink

Please sign in to leave a comment.