AC Wave 2R (HeliOS-W2R: Spark W2 Mini) Follow
Supported models
Service Releases v2.3.4
Downloads
- Fix issue when client cannot associate WPA2-PSK + RADIUS Mac Auth SSID
- Fix client cannot get IP when connecting to 5Ghz
- Fix 2.4Ghz interface failed to start issue
Service Releases v2.3.3
Downloads
-
Fix Ethernet status display incorrect in Local web UI issue
Known issues
- Configure Customized Hotspot logo might cause abnormal behavior: device unreachable and reset to default after firmware upgrade, configuration task failed and received config task failed
- For SP-W2M-AC1200-POE, traffic graph in Local Web GUI will display incorrectly.
Service Releases v2.3.1
Downloads
-
Fix ETH1 LED does not display correct issue
-
Fix ping watchdog does not work properly in certain interval issue
-
Fix Proximity cannot work properly issue
-
Support 5GHz channel 52-64
-
Support 5GHz channel 100-144
-
Support "Disable W52 Channel": If this option is checked, When AP detects radar signal, AP will not change channel to W52 channel(36-48)
Service Releases v2.3.0
Downloads
-
Add support mDNS discovery
-
Add support for wireless scheduler
-
Add option to hide SSID when WAN disconnected
-
Add support for AutoWDS
-
Add support multiple VLAN over PPPoE
-
Enhanced the Smart Isolation
-
Update JP country support channel list
Service Releases v2.2.0
Downloads
- Fixed Cloud registration issues.
- Fixed Hotspot issues
- Fixed VLAN 100 passthrough
- Fixed ETH1 LED always on
- Add VLAN tag option in Internet Settings
- Add support mDNS discovery
- Add Support for wireless scheduler
- Add Option to hide SSID when WAN disconnected
Service Releases v2.1.x
- Improved device (de)registration to/from cloud handling.
- Fixed config apply races when configuring from cloud.
- Increased number of allowed VLANs in GUI to 16.
- Reviewed and updated client info caching methods.
- Fixed interface state reporting in statistics.
- Improved periodic task scheduling and execution.
- Fixed memory leak when handling kernel events.
- Fixed service watchdog process duplication.
- Fixed wireless driver unload issues.
- Fixed invalid connection state detection in STA mode.
- Fixed stats collector lockups.
- Update JP country support channel list
Service Release v2.1.5
- Updated probe request caching method
Service Release v2.1.3
August 27, 2018
- Fixed an issue where in rare cases, a troubleshooting file task initiated from the Cloud would cause the device to go offline.
- Updated the channel list regulations for the TW country code.
Service Release v2.1.2
August 17, 2018
- Fixed ethernet ports link stated detection, causing incorrect LED states.
- Fixed SSID configuration, causing intermediate "ghost" SSIDs on devices.
- Updated clients counting and assoc time calculation.
- Fixed client addresses learning on ethernet switch, causing parallel link disruptions.
- Fixed unicode SSID configuration, causing radio down for longer SSIDs.
- Fixed wireless statistics reporting.
- Changed client probes push period to 15 seconds.
Known issues
- Configuring VLANs 8, 9, 100 does not work.
- Support added for the SP-W2M-AC1200-PoE model
- Fixed SNMP config keys migration
- Update channel utilization computation in multi SSID setups
- Added RADIUS DAE support
- Fixed hotspot startup without RADIUS server enabled
- Fixed max clients limit configuration
- Improved wireless driver logging
- Removed AMPDU control from GUI
- Fixed VLAN traffic passing through on the SP-W2M-PoE
- Clean up sysupgrade persisting files list
- Fixed ethernet link detection on SP-W2M-PoE
- Fixed traffic charts data reporting
- Fixed wireless statistics reporting in GUI
- Update JP country support channel list
Known Issues
- SP-W2M-PoE always reports ethernet port autoneg as being disabled in the local web GUI
- There is high CPU usage in client mode
Service Releases v2.0.x
Service Release v2.0.3
- Added support for the new smart isolation "Strict internet access" option to both the LANs and hotspot configuration
- Fixed miscellaneous GUI statistics
- Fixed cloud statistics reporting
- Fixed channel utilization statistics
- Fixed firewall configuration races
- Fixed some issues with secondary VAP configuration
- Fixed clients connectivity issues using TKIP/CCMP cipher
- Added RADIUS accounting interim interval setup
- Fixed RADIUS accounting stop event packet counters
- Various client mode connectivity fixes
- Updates for the hotspot splash page
Service Release v2.0.2
- Fixed client RSSI/SNR reporting
Known issues
- MacBook connectivity issues.
Release v2.0.1
Downloads
Change Log
- Various cloud statistics fixes.
- Fixed remote TS fetching support.
- Miscellaneous GUI configuration fixes.
- Fixed probe request reported SSID as host VAP SSID.
- Added probe request HTTPS server push support.
- Fixed telnet startup configuration.
- Fixed LEDs activity identification on WiFi interfaces.
- Fixed an issue where sysupgrade caused partial config loss in some cases.
- Reduced required MAC allocation to 5.
- Updated TH country EIRP limits.
- Updated TxPower limit tables.
- Fixed N-mode reset after site survey.
- Fixed various kernel warnings
- TxPower control rework.
- Fixed Client mode WPA2 Enterprise security.
- Fixed invalid probe request SSID in "Client" mode.
- Added UTC timestamp field into probe data.
- Added VLANs configuration fixes.
- Added Hotspot configuration fixes.
- QoS and power saving configuration fixes.
- Added Client isolation support.
- Added Wireless ACL support.
- Added Radius MAC ACL support.
- Added OT country support.
- Added Min client signal support
Comments
0 comments
Article is closed for comments.