What is the default IP address of my access point? Follow
WAN/PoE port:
The WAN port by default will receive a DHCP client address if it is connected to a network with a DHCP server. If no DHCP server is present, the AP will revert to a fallback IP address of 192.168.1.20 and a subnet mask of 255.255.255.0. To access the AP's web management interface from the WAN port, follow these steps:
1. Use your web browser to connect to the management interface using the IP address assigned by your DHCP server. If the AP is not connected to a DHCP server, you can access it at the fallback IP address 192.168.1.20 (make sure that your IP is in 192.168.1.x).
2. Login to the interface by entering the default
username
(if not yet changed) “root” with the password “admin123”, then click Login.
Note: When you
setup
the site on the cloud, it forces you to either set new login password, or it will generate one for you randomly.
LAN port(s):
1. Use your web browser to connect to the management interface using the default IP address of 192.168.2.1.You can set your PC IP address mode to DHCP client or manually set the IP address to be on the same subnet as the AP (the PC and AP addresses must both start with 192.168.2.x).
2. Login to the interface by entering the default
user name
(if not yet changed) “root” with the password “admin123”, then click Login.
setup
You can access the management interface from the LAN ports on 192.168.2.1, subnet mask 255.255.255.0. To access the AP's web management interface from any of the LAN ports, follow these steps: Note: When you the site on the cloud, it forces you to either set new login password, or it will generate one for you randomly.
Comments
0 comments
Article is closed for comments.