- Switch model name: AS7326-56X
- Edgecore SONiC version: SONiC.Edgecore-SONiC_20200722_070543_ec201911_141
- There is no SONiC command to add MC-LAG
- There can be only one MC-LAG domain configured in the system.
Example : Establish L2 MC-LAG
Step 1: Create port-channel on all of the switches. Please refer to LAG (Link-Aggregation) tutorial.
Step 2: Create and add the VLAN to all of the Interfaces. Please refer to VLAN & Inter-VLAN Routing tutorial.
For example: Add VLAN 10 to PortChannel1, and Ethernet52.
Step 3: Add the IP address on Ethernet48. Please refer to Management and front port IPv4/IPv6 Address tutorial.
Step 4: Create an MC-LAG domain on config_db.json
"1" is the ID of the MC_LAG domain ID.
Key "local_ip" is source IPv4 address to be used for MC-LAG session. This is local address.
Key "peer_ip" is peer IPv4 address to be used for MC-LAG session
Key "peer_link" is mandatory for L2 config. this links is used to carry data traffic when MC-LAG interface is down.
Key "mclag_interface" is MC-LAG member port, it needs to be portchannels.
Step 5: Reload config and check MC-LAG status.