How to configure Captive Portal with RADIUS authentication on EWS4502 ? Follow
Brief Introduction:
1. Please make sure your RADIUS Server configure properly on EWS4502.
2. Configure Capital Portal with RADIUS authentication on EWS4502
A. Global Configuration
B. CP Configuration
C. Interface Association
3. Result
Details of configuration:
1. Please make sure your RADIUS Server configure properly on EWS4502 before you start the next step. Please refer to FAQ "How to configure RAIUD Server on EWS4502" for more information.
2. Configure Capital Portal with RADIUS authentication on EWS4502
A. Global Configuration
System -> Security -> Captive Portal -> Global Configuration
Step 1 : Check the box of "Enable Captive Portal" and press Submit button.
B. CP Configuration
System -> Security -> Captive Portal -> CP Configuration
Step 1 : Click "Default"
Step 2 : Change Verification Mode to RADIUS
*Make sure the name of RADISU Auth Server is the same as RADIUS Server Name that we set before. (Refer to FAQ "How to configure RAIUD Server on EWS4502".)
Step 3 : Press Submit button and Check Configuration.
C. Interface Association
System -> Security -> Captive Portal -> Interface Association
Step 1 : Choice and Add one SSID for CP Configuration from Interface List.
Step 1 : Choice and Add one SSID for CP Configuration from Interface List.
3. Result
When the client connect to AP for surfing network, the system will redirect to portal login page. Fill-in username & password and press "Connect" button.
Authentication is successful.
Administrator is able to get client information from EWS4502.
System -> Security -> Captive Portal -> Client Connection Status
Comments
0 comments
Please sign in to leave a comment.