[ONL]How to install the Open Network Linux on Edgecore switch? (For x86 CPU only, Exclude AS5710 series and AS4610 series) Follow
How to install the Open Network Linux on Edgecore switch (For x86 CPU only, Exclude AS5710 series and AS4610 series)?
Booting the switch, then choose “ONIE: Install OS”.
You will get into ONIE.
When you get into ONIE, the system will print the messages by itself all the time.
Those messages means the device is searching for the information.
Below are the information which the device is searching for.
You can stop the searching by this command.
Here’s the way to set the management port IP.
Now you could install the ONL. (Open Network Linux)
Open the TFTP Server, and then upload the file to the switch.
After uploading, the switch will install the ONL by itself.
* You can also use this ONIE command to install the NOS:
ONIE:/ # onie-nos-install [URL or File name]
After installing, the switch will reboot by itself.
Please choose the Open Network Linux.
Here’s the way to login.
Please sign in to leave a comment.