AS5835 series - Error "ixgbe 0000:06:00.0: The EEPROM Checksum Is Not Valid" Follow
Purpose :
This article shows how to fix the "ixgbe 0000:06:00.0: The EEPROM Checksum Is Not Valid" error.
Model :
AS5835-54X / AS5835-54T
Symptom:
Upgraded the BIOS firmware from v37 to v47, then it will print out the following error message in the ONIE booting process.
ONIE: Rescue Mode ...
Platform : x86_64-accton_as5835_54x-r0
Version : 2019.08.00.01
Build Date: 2019-09-04T15:56+0800
ixgbe 0000:06:00.0: The EEPROM Checksum Is Not Valid
ixgbe 0000:08:00.0: The EEPROM Checksum Is Not Valid
ata1.00: failed to set xfermode (err_mask=0x40)
Info: Mounting kernel filesystems... done.
Info: Mounting ONIE-BOOT on /mnt/onie-boot ...
Info: Mounting EFI System on /boot/efi ...
Info: BIOS mode: UEFI
Info: Using eth0 MAC address: 34:ef:b6:74:87:38
Info: eth0: Checking link... up.
Info: Trying DHCPv4 on interface: eth0
Solution:
- Please check the "Network Stack" setting in the BIOS menu.
[Advanced] > [Network Stack Configuration]
If the "Network Stack" setting is [Disabled].
Then please configured it to [Enabled].
After that, please "Save Changes and Reset". Then, this problem will be fixed.
Comments
0 comments
Please sign in to leave a comment.